Product Features:
1. Up and down, left and right, and horizontal adjustments are all adjusted by knobs, which is simple and convenient.
2. The cantilever bracket body adopts a profile structure design to enhance its bearing capacity and improve its overall stability. It overcome the “bending down” problem of the traditional cantilever bracket after a period of using. In addition, a special structure is adopted at the junction of the inner and outer tubes, which greatly increases the adjustment range of the inner and outer tubes.
3. The cantilever holding base adopts a frame structure design and has a large connection area with the wall and has more fixed points, which overcomes the phenomenon of loose joints with the wall , which is common problem of the traditional cantilever projector arm.
4. The painting surface is made of electrostatic spray, with beautiful appearance and good corrosion resistance.
5. Suitable for most of laser projectors
| Technical Parameters | ||||
| Specification | 03 Specification | 05 Specification | 08 Specification | 12 Specification |
| Model | X03 | X05 | X08 | X12 |
| Net Weight | 4kg | 4.5kg | 5.4kg | 6.2kg |
| Gross Weight | 5kg | 5.5kg | 6.6kg | 7.4kg |
| Rated Loading Weight | 20kg | 18kg | 16kg | 14kg |
| Adjusting Range | 260mm-520mm | 365mm-635mm | 550mm-100mm | 665mm-1250mm |
| Packing Size for 1 set | 370*180*280mm | 445*180*280mm | 660*180*280mm | 710*180*280mm |
| Other Parameters | ||||
| Materials | Cold rolled steel plate, plastic | |||
| Holding Base Cover Size | 36*27cm | |||
| Cantilever length* width | 10.5*5cm | |||
| Outer tube bottom plate | 19×10.9cm | |||
| Cantilever diameter | 5cm | |||
| Processing of Internal and external pipe | Mold extrusion | |||
| Cantilever size | The arm of the supporting cantilever is made of 1.5mm cold-rolled steel plate, and the gap between the inner and outer tubes of the telescopic structure is ≤0.1mm | |||
| Surface treatment | Electrostatic spraying treatment after pickling and phosphating | |||
| Loading weight | The product bending down no more than 3mm when the machine weighs 15 kg | |||
| Position drift | When hoisting a projector within 15 kg, there is no displacement when the external force slightly touches the projector | |||
| Fixed base size | The projector arm fixed base adopts high-quality steel plate larger than 235mm*145mm*2.5mm | |||
| Angle adjustment | The screen pans up and down as a whole, the size of the screen, the screen horizontally pans left and right, the left and right trapezoid of the screen, the up and down trapezoid of the screen, the height of the screen can be adjusted in 6 directions, 3 of which have fine-tuning knobs | |||
| Hole position | The connecting plate is equipped with grippers, which can be installed in different holes | |||
